Afro Puff Girl Superhero DTF Transfer 8.5 x 11 1 for $10
Afro Puff Girl's Super Hero DTF Transfer
$5.00 - $10.00
Product:
1-Original DTF Heat Transfer of little black girl with big afro puff in pastel pink and turquoise super hero suit & cape on OH background.
Our DTF heat transfer is 8.5 X 11 inches in size and printed on a direct-to-film transfer that can be applied to white and dark colored garments, as well as fabrics as varied as 100% cotton, cotton blends, polyester, nylon and even denim garments.
A household iron may be used, but you should consider that:
1). Household irons do not get hot enough to properly adhere heat transfers for long-term. Prints are also likely to fade after only a few washes.
2). We do not recommend adhering transfers with a household iron if you are planning to sell the finished product. A household iron may work fine for garments for personal use but we wouldn't advise it for commercial sales. Your customers will likely not be pleased with the results in the long-run.
So we highly recommended using a commercial grade heat press that can produce temperatures up to 400 degrees fahrenheit. If you do not already have one, there are many sites, like Amazon, that offer low-cost, starter (less than $300) commercial grade heat presses.
DTF HEAT TRANSFER INSTRUCTIONS:
Preset heat press to 275 to 300 degrees F, depending on your press. You may want to start with a lower temperature first if unsure, and increase if needed.
Pre-press the garment for about 5-7 seconds to remove any moisture.
Center DTF transfer on garment and heat press for 15 seconds. Our DTF transfers are cold peel, which means that they need to cool down before removing film from garment. We recommend to allow them to cool for at least 10 minutes, and then carefully remove the film from garment. Afterwards, repress garment for 5-7 seconds covered with teflon sheet to protect it from direct contact with heat press. Once the garment has been pressed for the 2nd time, the transfer is now permanently adhered.
WASHING INSTRUCTIONS:
Do not wash garment for at least 24 hours after heat pressing.
When washing, turn garment side inside-out. We recommend machine washing with mild detergant. Bleach and fabric softener are not recommended, as they can compromise the DTF transfer film over multiple washes.
Garment can be dried normally in machine dryer. Dry-cleaning is not recommended.
These instructions are meant to be general and in no way provide a guarantee or warranty. However, with normal care, your DTF transfer should last for years with no degradation of quality or color.
Product: 1-Original DTF Heat Transfer of little black girl with big afro puff in pastel pink and turquoise super hero suit & cape on OH background.
Our DTF heat transfer is 8 1/2 X 11 inches in size and printed on a direct-to-film transfer that can be applied to white or color 100% cotton and cotton blend garments.
A household iron may be used, but you should consider that: 1). Household irons do not get hot enough to properly adhere heat transfers for long-term. Prints are also likely to fade after only a few washes. 2). We do not recommend adhering transfers with a household iron if you are planning to sell the finished product. A household iron may work fine for garments for personal use but we wouldn't advise it for commercial sales. Your customers will likely not be pleased with the results in the long-run.
So we highly recommended using a commercial grade heat press that can produce temperatures up to 400 degrees fahrenheit. If you do not already have one, there are many sites, like Amazon, that offer low-cost, starter (less than $300) commercial grade heat presses.
DTF HEAT TRANSFER INSTRUCTIONS:
Preset heat press to 275 to 300 degrees F, depending on your press. You may want to start with a lower temperature first if unsure, and increase if needed.
Pre-press the garment for about 5-7 seconds to remove any moisture.
Center DTF transfer on garment and heat press for 15 seconds. Our DTF transfers are cold peel, which means that they need to cool down before removing film from garment. We recommend to allow them to cool for at least 10 minutes, and then carefully remove the film from garment. Afterwards, repress garment for 5-7 seconds covered with teflon sheet to protect it from direct contact with heat press. Once the garment has been pressed for the 2nd time, the transfer is now permanently adhered.
WASHING INSTRUCTIONS:
Do not wash garment for at least 24 hours after heat pressing. When washing, turn garment side inside-out. We recommend machine washing with mild detergant. Bleach and fabric softener are not recommended, as they can compromise the DTF transfer film over multiple washes. Garment can be dried normally in machine dryer. Dry-cleaning is not recommended. These instructions are meant to be general and in no way provide a guarantee or warranty. However, with normal care, your DTF transfer should last for years with no degradation of quality or color.